Cantitate
|
Preț
|
||
|
Biral Heat circulation pump
PrimAX 25-6 130 RED
Inkl. thermal insulation shells,
Biral Connector and angled connector
EEI <=0,17; 1x230V
High-efficiency built in pipe pump
with permanent magnet motor
for feeding hot water
according to VDI 2035, with continuous
speed control for:
-Proportional pressure pp
-Constant pressure cp
-Constant speed cs
Feed medium: Apa
Feed height:
Feed volume:
Medium temperature: 2 °C...110 °C
Ambient temperature: 0 - 40°C
Max. operating pressure: 0 kPa
Diameter nominal: DN 25
Installation lenght: 130 mm
Flange connection: G 1 1/2"
Rohranschluss: Rp 1"
Voltage: 230 V
Frequency: 50 / 60 Hz
Motor input: 0.003 kW...0.034 kW
Nominal current: 0.03 A...0.27 A
Type of protection: IP X4D
Insulation class: F (155°C)
Motor protection:Integrated
Pump casing: grey cast iron
Impeller: PES 30%GF
-Fault display
-Power input diplay
-Flow indicator
-Key lock
-Operating status display
Gross weight: 1.9 kg
L, PE, N Power supply
Caracteristici | ![]() |
||
Caracteristică | max. | ||
Motor | |||
Producator | BIRAL | ||
Categorie principala | 1~ motor monofazat | ||
Conceptie motor | 1~ motor cu curent alternativ | ||
Frecvenţă, număr de poli | 50 Hz - 4 poli | ||
Motor | PrimAX -6 (0.05 kW) | ||
Grad de protectie | IP X4D | ||
Tip protectie anti-ex | -- | ||
Racord electric | 230 V | ||
Tipul instalatiei | |||
Nume | ![]() |
||
Combinatia de materiale | |||
Combinatia de materiale | PrimAX | ||
Carcasa pompei | Fontă | ||
Rotor | PES | ||
Conductă în spirală | Inox | ||
Dichtung | EPDM | ||
Lagăr de alunecare | Ceramică | ||
Arbore | Ceramică | ||
Racorduri de ţeavă | |||
Racord | ![]() |
||
Intrare | |||
Pres nominala | PN 10 | ||
Diametru nominal al conductei | PN 10 | ||
Iesire | |||
Diametru nominal al conductei | G 1 1/2" | ||
Alte optiuni | |||
Schemă electrică | 961958_00 |